Residential

Tesla Wall Connector Installation in Collierville, TN

Tesla Wall Connector installation in Collierville is a hardwired job: a licensed electrician runs a dedicated circuit, mounts the unit, and sets its current to match the breaker. Setup over Wi-Fi finishes the job. The electrician handles the Town permit and inspection, so the unit is checked before daily use.

Call (901) 555-0100

One call, no forms.

Collierville, TN

Who Needs a Tesla Wall Connector?

This charger fits owners who want a neat, wall-mounted unit with a built-in cable.

Tesla owners who want full home charging overnight
Homes with two Teslas that need to share one circuit's capacity
Owners of other EVs that use the NACS port
Drivers who plan to keep the house for years and want a fixed setup

What Is Part of a Wall Connector Install?

A Wall Connector electrician in Collierville usually handles these tasks.

A panel check and load calculation for the new circuit
A breaker and copper wire sized for the chosen current
Mounting the unit and its cable holder at a height that suits your parking
Setting the unit's internal current limit to match the breaker
Wi-Fi commissioning so the unit can receive updates
Power sharing setup when two units share capacity

What Are the Steps for Tesla Home Charging?

Step 1: Call and Share Your Garage Layout
Phone (901) 555-0100 and describe your car, where the charge port sits when you park, and the spot of your panel.
Step 2: Size the Circuit
Your electrician checks spare capacity and picks a breaker size. The Wall Connector is then set to match it.
Step 3: Plan Cable Reach
Mount height and side of the garage decide whether the cable reaches the port without crossing a walkway.
Step 4: Commission the Unit
The electrician joins the unit to your Wi-Fi, confirms the current setting, and runs a test charge.
Step 5: Quote, Permit, and Final Inspection
A written quote comes first. Your electrician pulls the permit and books the inspection with the Town.

What Drives the Price of a Wall Connector Install?

No two garages are alike, so these factors set the scope.

Spare Panel Capacity

A full panel may call for load management or a panel upgrade.

Length of the Run

A charger on the far side of a two-car garage needs more wire.

Second Unit for Power Sharing

Two units add wiring and setup time.

Finished Walls

Drywall, brick, or a ceiling path adds labor compared with open studs.

Permit Fees

The permit office sets its own fees.

Which Code Rules Cover a Wall Connector?

NEC Article 625 and Continuous Load

Article 625 of the NEC governs chargers like the Wall Connector. Because EV charging is a continuous load, a 48 amp setting needs a 60 amp circuit, and a 40 amp setting needs a 50 amp circuit.

The Edition in Force

In the Town of Collierville, the code in force as of October 2026 is the 2017 NEC with Town amendments. Your electrician applies the GFCI rules in that edition and confirms it at permit time.

Load and Wire Rules Under Town Amendments

The Town's amended 220.1(a) asks the installer to confirm the service can carry the total connected load, and amended 220.10 covers branch-circuit load calculations. Where aluminum feeders come into play, the Town's amended 110.5(a) and 334.10 limit their use in homes.

Licensing and the Permit Office

Per the Town's rules, electrical work calls for a state or county licensed contractor. The Town of Collierville Building & Codes Division issues the permit. See how permits and inspections work.

What Is Different About Tesla Charging in Collierville?

Tesla home charging in Shelby County runs through MLGW, which buys power from TVA. Check current rebates and incentives before you buy hardware.

Spring storms and summer heat test garage gear. A surge protector at the panel can help shield the unit, and a late-night schedule keeps the charger from stacking on top of peak AC use.

Mailing address alone does not settle the permit office. Some 38017 addresses sit in Piperton, in Fayette County, where the State Fire Marshal handles electrical permits.

Buying a home with a Wall Connector already on the wall? An EV readiness inspection can confirm the circuit size and setting.

Sources

Town of Collierville Building & Codes Division, Adopted Codes and Local Amendments
NFPA 70, National Electrical Code, Article 625
Tennessee Department of Commerce and Insurance, Division of Fire Prevention

FAQ

Tesla Wall Connector Questions

Have another question about Tesla Wall Connector? The EV charger FAQ covers more.

Can a Non-Tesla EV Use the Wall Connector?

Often, yes. Some non-Tesla EVs charge from it with an adapter, and a J1772 version exists for cars whose automaker supports it. Check your automaker's guidance first.

How Does Power Sharing Work With Two Units?

Power sharing is a load-management feature. Two Wall Connectors split one circuit's capacity, so both cars charge without overloading the panel.

Does the Wall Connector Need Wi-Fi?

Wi-Fi is not needed to charge, but it lets the unit receive updates. Your electrician can connect it during commissioning.

What If the Unit Shows a Fault Light?

Note the light pattern and check the breaker. If the fault returns, call for EV charger repair. Our FAQ page covers more common questions.

Should I Choose a Wall Connector or a Generic Level 2 Unit?

Both charge at Level 2 speeds. Compare options on our Level 2 home charger page.

Get connected today

Talk Through Your Tesla Wall Connector Plan

A licensed local electrician can look at your panel, your parking spot, and the permit path for Tesla Wall Connector work in Collierville.

Call to speak with a local electrician about your EV charger install.

(901) 555-0100 Get connected today

Independent electricians licensed in Tennessee
One call, no forms
Your electrician handles the permit and inspection